The Intel SSD 545s (512GB) Review: 64-Layer 3D TLC NAND Hits Retail

Today Intel is introducing their SSD 545s, the first product with their new 64-layer 3D NAND flash memory and, in a move that gives Intel a little bit of bragging rights, the first SSD on the market to use 64-layer 3D NAND from any manufacturer.

The Intel SSD 545s is a mainstream consumer SSD, which these days means it’s using the SATA interface and TLC NAND flash. The 545s is the successor to last year’s Intel SSD 540s, which was in many ways a filler product to cover up inconvenient gaps in Intel’s SSD technology roadmap. When the 540s launched, Intel’s first generation of 3D NAND was not quite ready, and Intel had no cost-competitive planar NAND of their own due to skipping the 16nm node at IMFT. This forced Intel to use 16nm TLC from SK Hynix in the 540s. Less unusual for Intel, the 540s also used a third-party SSD controller: Silicon Motion’s SM2258. Silicon Motion’s SSD controllers are seldom the fastest, but performance is usually decent and the cost is low. Intel’s in-house SATA SSD controllers were enterprise-focused and not ready to compete in the new TLC-based consumer market.

The Intel SSD 545s continues Intel’s close relationship with Silicon Motion by being one of the first SSDs to use the latest SM2259 controller. Since the SATA interface is now a dead-end technology, the SM2259 is a fairly minor update over the SM2258 controller used by last year’s Intel SSD 540s. The only significant new feature enabled by the updated controller is hardware end-to-end data protection that includes ECC on the controller’s SRAM and on the external DRAM. This will make the 545s more resilient against corruption of in-flight data, but it should not be mistaken for the power loss protection that is typically found on enterprise SSDs.

The flash memory used in the Intel 545s is Intel’s second generation 3D TLC NAND, a 64-layer design with a floating gate memory cell. Intel did not use their first-generation 32-layer 3D NAND in a consumer SATA SSD, but the 32L 3D TLC is at the heart of Intel’s SSD 600p, their first M.2 NVMe SSD and one of the most affordable consumer NVMe SSDs.

Similar to the strategy Micron used last year when introducing the Crucial MX300, the Intel 545s initially brings a new generation of 3D NAND to the market with just a single SKU. The 512GB 545s is available now on Newegg, with other capacities and the M.2 SATA versions to follow over the next few weeks. The full lineup will include capacities from 128GB to 2TB in both 2.5″ and M.2 form factors.

Intel will be using their smaller 256Gb 64L TLC die for all capacities of the 545s, rather than adopting the 512Gb 64L TLC part for the larger models. The 512Gb die is not yet in volume production and Intel plans to have the full range of 545s models on the market before the 512Gb parts are available in volume. Once the 512Gb parts are available we can expect to seem them used in other product families to enable even higher drive capacities, but it is reassuring to see Intel choosing the performance advantages of smaller more numerous dies for the mainstream consumer product range.

Meanwhile, over the rest of this year, Intel plans to incorporate 64L 3D NAND into SSDs in every product segment. Most of those products are still under wraps, but the Pro 5450s and E 5100s are on the way as the OEM and embedded versions of the 545s.

Intel seems to be in a hurry to get this drive out the door so they can claim to be the first shipping SSDs with 64-layer 3D NAND. At Computex we saw Western Digital announce their first 64L 3D NAND SSDs due to be available in Q3, and Toshiba is already sampling the XG5 M.2 NVMe SSD to OEMs. Earlier this month, Samsung announced the start of volume production of their 64-layer 256Gb V-NAND. By launching with retail availability this week, Intel has narrowly secured first place bragging rights. (It seems Intel and Micron might have an agreement to take turns introducing new 3D NAND, given that Micron was first to ship the 32L 3D NAND last year with the Crucial MX300.)

The downside is that this is a rushed launch; I’ve had the drive in hand for less than five days as of publication time, and that time spanned a weekend. Intel’s press briefing on this drive was a mere fifteen hours before the embargo lift, and the slides included some changed specifications relative to the product brief that was delivered with the drive last week. As with several of their recent SSD launches, Intel is only providing the one-page product brief and is withholding the full specifications document from the general public and the press, but this time it might genuinely be due to the latter document not being ready instead of motivated by the questionable IP security concerns Intel cited earlier this year.

Leave a Reply

Your email address will not be published. Required fields are marked *